|
 |
| Water Tight Doors & Air Vent Check Valves |
|
|
|
| |
 |
| |
We represent Winel for Water Tight Doors & Air Vent Check Valves
Winel offers a wide range of doors, hatches, platforms, venting systems and special engineering services. Our strength is
that we can offer the client an in house service package which includes design & engineering, manufacturing, assembly and after sales services.
Watertight Sliding Doors, Watertight doors
An extensive range of watertight bulkhead doors is available. A distinction is made between hinged watertight doors and
sliding watertight doors. Designs are class approved and our doors are fully built according SOLAS rules. Each door leaves our factory with an individual class test certificate.
Hinged watertight doors
The watertight hinged doors are part of our Q-line standardised door program. In its standard execution the doors are
designed to withstand an admissible water pressure of 12 mWc from both sides.
Watertight sliding doors
We design and manufacture watertight sliding doors in full compliance with the IMO/SOLAS regulations. We offer a proven
design of a compact door and frame assembly with a very simple and reliable control system.
 |
Please Choose from
|
Condor Q-line electric watertight sliding door
The fully electric watertight sliding door CONDOR is our new type of compact door. It is supplied as a completely finished as tested unit, ready for welding in. It combines the well known proven mechanical design of the doors, in standard sizes, with a standardized electrical drive system. This means there are less options but it turns out to be a cost saver for the yard without compromising on quality.
The design and manufacture of CONDOR doors are in full compliance with the IMO/SOLAS safety regulations for cargo ships and passenger ships to fulfil the watertight integrity of the vessel and is type approved by all major classification societies. |
| |
|
Albatros Q-line watertight sliding door
The electro-hydraulic watertight sliding door ALBATROS is a new type of compact door. It is supplied as a completely finished and tesed unit, ready for welding in. It combines the well known proven mechanical design of the doors, in standard sizes, with a standardized and simplified hydraulic and electrical system. This means there are less options but it turns out to be a cost saver for the yard without compromising on quality.
The design and manufacture of ALBATROS doors are in full compliance with the IMO/SOLAS safety regulations for passenger ships and MOU (mobile offshore units) to fulfil the watertight integrity of the vessel and is type approved by all major classification societies. |
|
|
Eagle Q-line watertight sliding door
The electo hydraulic watertight sliding door EAGLE is new type of compact door. It is supplied as a completely finished and tested unit, ready for welding in. It combines the well known proven mechanical design of the doors, in standard sizes, with a standardized and simplified hydraulic and electrical system. This means there are less options but it turns out to be a cost saver for the yard without compromising on quality.
The design and manufacture of EAGLE doors are in full compliance with the IMO/SOLAS safety regulation regarding Class II doors to fulfil the watertight integrity of the vessel and is type approved by all major classification societies. |
Seagull Q-line watertight sliding door
The hand-hydraulic watertight sliding door SEAGULL is our most basic
version of watertight sliding door. It is supplied as a completely finished and
tested unit, ready for welding in. It combines the well known proven
mechanical design of the doors, in standard sizes, with a standardized and
simplified hydraulic and electrical system. This means there are less options
but is turns out to be a cost saver for the yard without compromising on
quality.
|
|
The design and manufacture of SEAGULL doors are in full compliance with
the IMO/SOLAS safety regulations regarding cargo vessels (reg 25-9) to fulfil
the watertight integrity of the vessel and is type approved by all major
classification societies.
|
| |
| A60 Weathertight & Watertight Fire Doors |
| |
Safety at Sea Level - The A60 Water - and Weathertight musketeer doors are designed for the most extreme conditions and are showing an excellent performance during fire testing and operational test. Winel produces Marine doors for over 30 years and holds type approvals from all major classifications.
A60 Water - and Weathertight Fire doors are fully MED Certified as fire doors according FPT-Code 2010. Winel’s A60 doors are type approved by DNV-GL according to the lastest rules for Classifications of ships and mobile offshore Units and comply with international Load line Convention, 1966. Individual approvals for ABS, LRS, BV are available. |
| |
A60 WT / WET Doors
- Weathertight (WET)
- Watertight (WT)
- Single handle operated (WET)
- Hand-wheel operated (WT)
|
Standard type
- All moving parts stainless steel
- Greaseless bearings
- Standard angle bar frame
- Excellent performance during fire
- Low maintenance, long lifetime
- Easy adjustable closing system
|
Options
- Door Locks (WET)
- A60 Windows (WET)
- A60 Bulls eyes (WET)
- Offshore frame, DNV GL C30I
- Coating
- Door closer / Wind hook
- Open / close indication
|
|
| |
| |
Musketeer system
Our quick acting doors are equipped with the patented Musketeer® mechanism. The main advantages of the Musketeer system are: |
| |
- Ultra-light operation, i.e. a force transmission of 1:33
- All closing points are adjustable
- Self braking mechanism (clips cannot vibrate loose)
- Fully self-greasing mechanism, maintenance free
- Only one feed-through (handle)
- Stainless steel 316 (L) central closing mechanism with quick acting handle.
|
| |
| Aluminium Tank Vent Check Valves |
| |
Winel produces valves for over 50 years and holds type approvals from all major classification societies.
Mutual Recognition Type Approval Certificates; This is to certify that these product(s) has/have been tested with satisfactory results in accordance with the relevant requirements of the European Union Recognised Organisations Mutual Recognition producer for Type Approval (ABS, DNV/GL, LR, BV CCS, KR/KRS, NK/ClassNK, PRS, RINA, RIVNAVE, RMRS/RS) |
| |
| Aluminium Tank Vent Check Valves CM |
| |
|
 |
Type CM : Cylindrical Model |
|
Sizes : DN40 - DN450 |
| |
|
| Options |
| |
|
|
Stainless Steel Screen |
|
Other flange connections |
|
Coating |
|
Powder Coating |
| |
| Standard type |
| |
|
|
Seawater resistant Aluminium Alloy |
|
Material : aluminium Algm4.5 |
|
Thickness according IACS rules |
|
Floater : PE float Ball |
|
Flange hole pattern DIN2576PNI0 |
|
Flange hole pattern JIS5K |
|
Flange hole pattern ANSI I50 Ibs |
|
High Liquid Flow |
|
High Air inlet flow |
|
Type approved |
|
 |
|
| |
| Tank vent check valves : |
| |
|
By using the Winel tank vent check valves you have the advantage of a solid, maintenance free and fully automatic operating system, supported by a service network of agents and stockists worldwide
Winel produces valves for over 40 years and holds type approvals from all major classification societies. Our tank vent check valves can be used on any type of commercially used vessel, yacht, navy vessel and offshore platform. Winel valves are fully automatic and require virtually no maintenance.
Available with nominal diameters up to 450 mm, they are supplied with either flange or butt-weld end, and can be fitted with flame screens as required. Although custom designs are available upon request, the main styles can be found in the datasheets. |
|
| |
| |
| For more information please visit www.winel.nl. |
| |
|
| |
|
 |
Disclaimer :
Information and photographs in this catalogue are an overview of OEM range products. For more / exact details please refer to original OEM catalogue. Products names, logos, brands and other trademarks featured or referred to within this document are the property of their respective trademark holders. |
|
